OmniMount ECSB Component Shelf Wall Shelf for TVs and Video Accessories

OmniMount ECSB Component Shelf Wall Shelf for TVs and Video Accessories..

GET OmniMount ECSB Component Shelf Wall Shelf for TVs and Video Accessories By OmniMount

Most helpful customer reviews

65 of 66 people found the following review helpful.
Picture is Deceiving
By Nak'm Dead
This is a quality unit, BUT the picture gives you the impression that the shelf does not extend out very far. The arm of the shelf extends so that the glass shelf begins 5" from the wall and extends out to 21" from the wall. This is the only complaint I have as the unit is otherwise well designed, sturdy, and the glass shelf(tempered) is first class. My suggestion, design a sliding extendable/retractable arm. The shelf is used to hold a direct TV receiver below a small wall hung 21" LCD in sewing room.

63 of 65 people found the following review helpful.
Good Looking Shelf
By (E) None Of The Above
This shelf is quite attractive and easy to install. The depth of it is greater than I was imaging, so if you're using it for a smallish item (like a DVD or cable box), it will stick out form the wall farther than you need.

70 of 81 people found the following review helpful.
Great product for the most part...
By Paul Waldman
This is a great wall mount shelf. There aren't a lot of 30 lb shelf mount speakers out there. I have Klipsch RS-62s that weigh in at 26 lbs each, and the shelves accomodate them. The down side is that one of the shelves was sent with screws that had no thread! Also you HAVE TO install thise into a stud, period! When you initially drill, make sure you find wood shavings as the drill bit comes out. When you install drill the other holes, MAKE SURE you measure from the ground to the top of the wall plate to assure the speakers will be at the same height. Also, make sure that before you do your drilling deep, LEVEL the plate using a LEVEL you can buy at any hardware store, so your speakers don't tilt in one direction or the other. Make sure the top side is on TOP and put the plastic cover on BEFORE you attach the glass, and that the glass is faced so the rounded edge is in the front! Good Luck!

See all 450 customer reviews...More...