DYMO LabelWriter 4XL, 4" x 6" Label Printer

DYMO LabelWriter 4XL, 4" x 6" Label Printer..

Special Price DYMO LabelWriter 4XL, 4" x 6" Label Printer By DYMO

Most helpful customer reviews

69 of 69 people found the following review helpful.
Great Printer for Ebay/Paypal Shipping And More
By K. Crudup
I bought this printer hoping to use it on Ebay Paypal to print shipping labels. Well it works perfectly as a label printer on Paypal/Ebay. It has saved me a ton of time and worth the money I spent since I ship frequently.

For example in paypal if I have to ship ten orders using the multi shipping tool I print all ten labels at once. You have the option of printing a packing sheet to a regular printer that tells you what is to be packed in each order for the labels just printed. You need to know the weight for each shipment before printing the labels though.

Its appears that the Dymo printer is compatible with Zebra printers. Use the multi shipping tool in Paypal and set your printer to a Zebra 4X6 printer. If you are not using multi shipment in Paypal be sure to set your printer type to thermal and pick one of the Zebra 4X6 printers.

Other reviewers said the printer jams frequently. I have no such problem. What I think may have happened to that reviewer was they did not discard the first labels. Before you install a new roll for the first time you have to remove a small piece of tape from the roll. Unfortunately that tape leaves a sticky residue on one of the exposed labels. If you use that label it will put that same sticky residue in the printer causing labels to stick and jam. Dont take the chance and just get rid of the first 2 or three labels on the roll.

One reviewer said the labels fade with time. Well its a "thermal" printer and almost every device that prints on thermal paper the "ink" fades. Its actually heat the "colors" the paper and that type of paper fades over time. That is a fact of thermal technology not a problem with the printer.

Extra credit: Take those labels you discard from the new roll and put them in direct sunlight for a few days.

47 of 48 people found the following review helpful.
An Underrated Product
By Leonie
Well, I had this for a few weeks, so I can't speak for some of the complaints, but I do use this in combination with Endicia to ship packages off and it works very well. Before this, I had multiple Zebra 2844.

For those who ship a lot, the Zebra 2844 (EPL) is the standard with most 4x6 labels made for it. It retails for $100-200 more than this machine, but is available ubiquitously used on ebay in the sub-$100 range. Once you get them up and running, they often print without fail.

However, the 2844's are a complete pain in the behind to set-up. We're talking playing with settings and inconsistent software from the manufacturer itself. Sometimes I d/l 3-4 software packages before the 2844 even responded at all, let alone correctly. All this wouldn't be so bad except on my Windows Desktop, if I so much as unplugged the usb cord to the computer for whatever reason (say I was moving it), and replugged it 5 minutes later in the very same USB slot, the computer wouldn't remember the printer at all, and the nightmarish set-up process would begin anew. Not acceptable. Maybe this was because the 2844 accepted parallel and serial port input as well, and USB was an afterthought in the design? Whatever the reason, it's very plug-and-play unfriendly. Also, when the computer went to sleep, the unit needed to be restarted or it would fail to respond. The third defect was that everytime I printed out a shipping label, between 1 and 7 blank labels followed. This wasn't always the case, but it was when I had to reinstall the driver and I could never figure it out. I experienced these defects on both a 2004 and 2007 manufactured 2844, so I would say these aren't random issues.

A while back, I got a notebook that replaced my desktop, I would move around, so plugging and unplugging the USB cords became a fact of life, so enter the 4XL. I always liked dymo's smaller models, they just worked, and this one was no different. You first install the very friendly software (whether d/led or from CD) and then any of their printers and the computer recognizes it without hesitation. I can plug my older Labelwriter 400 or my new 4XL or both and there will be no problems, whether the dymo label software is actively running or not (I use endicia instead). It prints without problem. I never had it jam. Can't say much more about it.

As to any jamming, I would recommend when installing any new rolls of labels that are sealed at the end with adhesive tape, thow away the labels the tape was on so any adhesive residue never enters the mechanism. That may be a source of the problem people are experiencing.

As for fading, this is a thermal printer and inherent to all thermal printers. Think of receipts as well that fade, as many are of the same technology. However, a nice dark print comes out of this that will last longer than those cheap receipts, so I have no fear shipping items, however long, long term labels for household items may require a second thought. They are affected by direct sunlight the most. Look up thermal printers in wikipedia for more info.

If I had a complaint, it's the cost of the rolls. Dymo is ridiculously expensive, wanting nearly $0.16 a label. Although 4x6 labels are an industry standard with many makers, the dymo labels are slightly different with a oblong hole between each label, perhaps telling the printer where to stop. I'm not sure. I still have the zebra labels, but I haven't had a chance to see if they worked in this machine. Dymo warns you not to use any 3rd party labels, but that's because of profit motive.

However, I see 3rd party compatible labels for this machine at a well known site called labelvalue. An excellent site, I got my zebra labels there for $0.051 (5.1 cents) a label. The dymo compatible labels are much cheaper than the "real thing" at $0.086 (8.6 cents) a label. For a small time operation, not a big difference. Figuring that I was throwing away 1-7 labels on the zebra per print, I still come out ahead.

I just have a small business and ship a dozen items a day. The dymo serves me well. If you ship day and night, and have a desktop dedicated to shipping (where the cords will absolutely never be touched), a zebra may be better, sturdier and cheaper in the long haul.

18 of 18 people found the following review helpful.
Great Printer For Creating 4x6 Ebay Shipping Labels with a Mac
By Silly Rabbit
I sell a lot of items on Ebay and I recently purchased this printer for the sole purpose of creating 4x6 inch Ebay Shipping Labels on a Mac. I was worried about whether I could get it to work because I've read about the various problems other people have been having getting it configured and the fact that Label Printers are not officially supported on the Mac. I'm pretty good at figuring things out so I took a chance and bought it. Long story short, I had to come up with my own solution in the end, but I ultimately got it to work quite easily. And I am now happily printing out perfect 4x6 inch Shipping Labels on a Mac. The printer is working flawlessly and the labels I'm printing are perfect. Therefore, this is a printer I highly recommend even if you're using a Mac. Below are the step-by-step instructions on how to got it to work:

*********

How To Print Perfect 4x6 Shipping Labels from Ebay usng the DYMO LabelWriter 4XL Printer and a Mac...

Most users selling items on Ebay already have their computer set up to print labels to their laser printer and to other kinds of printers, and for PC users, that also includes to Label Printers as well, such as the DYMO LabelWriter 4XL printer. Unfortunately for Mac users, Label Printers are not officially supported. The good news is, there is an easy way for Mac users to make use of the DYMO LabelWriter 4XL printer as well, and can easily print out perfect 4 inch by 6 inch shipping labels every single time. The following explains how...

For Mac users, when printing a label via Ebay, on the page that says "Purchase and Print USPS Postage", once you've clicked the button that says "Purchase Postage" to buy your label, a secondary page should open allowing you to print your label. It is on that secondary page that we will choose certain options which will allow us to print directly to the DYMO Laserwriter 4XL printer with a Mac, and we can get perfect results every time. The following are my step-by-step instructions...

Step 1 - After clicking on the "Purchase Postage" button and arriving on the secondary page, click the button above the label window that says "Print Label". This will open up a Print Dialog Box to allow you to select your printing options. Note, we will NOT be printing from this particular Print Dialog Box at this time because we first have to "crop" the label. To accomplish this, ignore all settings and options in the current Print Dialog Box. Instead, at the bottom of the Print Dialog Box window, click the button that says "Preview". This will open the entire label including your receipt in a separate window in Apple's Preview program. We will now use the "Crop" tool in Apple's Preview program to "crop" the label from the page...

Step 2 - Once the label is open in Apple's Preview program, you may notice that it is now oriented sideways. Don't worry about the orientation. It will still print correctly once we're done. In Apple's Preview program, choose the rectangular selection tool and select the area around the label where you want it to be cropped (I generally select an area about a 1/4 inch around the entire label). Once the area has been selected, choose "Crop" from the Tool menu (this crops out the receipt and all other unnecessary portions of the page). All that is left is your label, perfectly cropped, and ready for printing. Note, before you proceed further, make sure your DYMO LabelWriter 4XL printer is connected to your computer and turned on, and that all software has been installed...

Step 3 - From the File menu (still in Apple's Preview program) choose the "Print" command. This opens up the Print Dialog box again. We will now choose certain printing options in this dialog box...

a. In the Print Dialog box, from the pull-down menu that says "Printer", choose the DYMO LabelWriter 4XL as your printer. (Note, your DYMO LabelWriter 4XL must be connected and turned on at this time in order for it to show up under this menu)...

b. VERY IMPORTANT - Under the pull-down menu for "Paper Size", scan down through the list of sizes and choose the preset that says: "1744907 4 in x 6 in". This option will match your cropped label to the 4 inch x 6 inch labels in the 4XL printer (otherwise, it will print at the wrong size).

c. ALSO IMPORTANT - Under the Scaling Options, choose the "Scale to Fit" option and also the "Print Entire Image" option (this scales your label image down to fit within the 4 in x 6 in label space without any portion of it being cropped off).

d. Under the pull-down menu that says "Preview", pull down the menu and choose "DYMO Options". For the "Print Quality" setting, change the menu from "Text Only" to "Barcode and Graphics". For the "Print Density" setting, change the menu from "Low" to "High" (this tells the DYMO LabelWriter 4XL to print the label with maximum density and with maximum contrast).

e. All options have now been set. We are now ready to print. Click the "Print" button at the bottom of the window. Your DYMO 4XL printer should begin printing, and should print out a perfect 4x6 shipping label every single time...

By following the above, I've been happily printing out perfect 4x6 shipping labels from Ebay using a DYMO LabelWriter 4XL printer and a Mac. And it's been working without a hitch...

**********

IMPORTANT UPDATE: For those of you who are using the Mac program Garage Sale when selling items on Ebay, an excellent shipping option to complement Garage Sale is the shipping program called "Endicia" (it costs about $16 per month). Not only does Endicia provide direct USPS Parcel Select support (which Ebay won't offer until March), but I've also learned that Endicia is fully integrated into Garage Sale. Meaning, once you have both Garage Sale and Endicia installed on your computer, and you then make an Ebay sale, in the Inspector Palette of Garage Sale there is an option you can choose which allows you to "ship the item with Endicia". By choosing that option from within Garage Sale, Garage Sale will then automatically find and launch your Endicia application, and the best part of all is that (...GET THIS!!!...) when Endicia opens, it will already be pre-populated with all your Ebay sale data! That's right, you won't have to copy and paste anything because all your Ebay details for the transaction will already be imported into Endicia and you'll be ready to print your label. All you have to do is just verify everything you see, make any changes needed, and then Print your shipping label. It's so easy. And did I mention that the Endicia for Mac program also offers direct support for the DYMO LabelWriter 4XL printer. That's right. Ebay doesn't offer any Label Printer support for Mac users, Paypal doesn't offer it, Stamps.com doesn't offer it, but Endicia DOES! There is a preference option in the Endicia for Mac program where Mac users can now print directly to the DYMO LabelWriter 4XL printer without any fuss or problems at all. I've been printing 4x6 labels using Endicia and the 4XL and it's been working like a charm. The 4x6 shipping labels are coming out perfect (even better than printing them via Ebay as outlined above). Endicia and Garage Sale are like a match made in heaven. I've found very few things otherwise to complain about. If you want a great Ebay shipping option solution that truly works on a Mac and is designed for a Mac, then Garage Sale and Endicia and the DYMO LabelWriter 4XL printer is your ticket.

See all 90 customer reviews...More...

Syma X1 4 Channel 2.4G RC Quad Copter - Spacecraft

Syma X1 4 Channel 2.4G RC Quad Copter - Spacecraft..

Special Price Syma X1 4 Channel 2.4G RC Quad Copter - Spacecraft By Syma

Most helpful customer reviews

190 of 199 people found the following review helpful.
Syma X1 Quad Bind Process / Radio not working
By Amazon Customer
Hey fellow owners and potential owners!

Noticed others are having the same problem my buddies and I had when I first received the Syma X1 Quad, they should UPDATE THE INSTRUCTIONS ASAP

I had an issue with the radio transmitter not binding with the Syma X1 quad and there IS A EASY SOLUTION.
The instructions are lacking in this area and are responsible I'm sure with a lot of frustration and probably returns.
In between my friends and I we have over 6 of these to date, they all work with this procedure that I quickly wrote for another amazon user.

SYMA X1 QUAD - RADIO TRANSMITTER BIND PROCESS

IMPORTANT SOLUTION TO ALL OWNERS - RADIO NOT WORKING WITH THE SYMA X1 QUAD

1. CONNECT BATTERY TO QUAD, THE LED WILL FLASH SLOWLY
2. LED WILL BEGIN TO FLASH RAPIDLY,.... IMMEDIATELY TURN ON RADIO TRANSMITTER
3. LED IS SOLID, BIND PROCESS COMPLETE. READY TO FLY

After connecting the battery to the quad the led will begin to flash slowly. Have the radio ready because the led will soon begin to flash quickly looking for a radio signal. As soon as the led begins to flash quickly immediately turn on radio. The Syma Quad led on the board will then be a SOLID on indicating the bind process is complete. You are now ready to fly or crash your quad. You only have to do this bind process once. From now on you can turn the radio transmitter on first and then connect the battery to the quad.
** It's important to have the quad on a level surface once you connect the battery so the gyros know what is level, do this EVERY TIME **

===========================
Extra Batteries

HYPERION BLADE MQX G3 CX 550MAH 1S 3.7V 25C LIPO BATTERY (HP-LG325-0550-1S-SR) around $8 shipped
Turnigy nano-tech 600mah 1S 35~70C Lipo Pack priced at $2.63

Pictures of the batteries and the Syma are under customer images
http://www.amazon.com/gp/customer-media/product-gallery/B0096SJU3U/ref=cm_ciu_pdp_images_all

47 of 48 people found the following review helpful.
how to switch from mode 1 to mode 2
By Custom Communications
Excellent little machine. When I first turned it on and tried to fly, it flew sideways into the wall. Tried several times with the same result.

solution: First, make sure that transmitter is off. Place battery into unit and immediately place it on the floor or other level surface. Wait for unit to stop flashing rapidly and is flashing slow, THEN make sure that throttle is off and turn on the transmitter, unit will pair with a steady light and an audible beep.

Happy flying. Remember it is a 4 channel. I have yet to flip it, just not enough room where I fly indoors and I have yet to determine where the 'A' button is to change it from mode 1 to 2.

FOUND IT!! thankfully!!

Transmitter off
Hold right horizontal trim button to the right
Power on transmitter
release trim button
display now reads Mode 2

Myself... I am so much happier with the unit now that I found mode 2. I am used to flying coaxials in this mode and find it instinctive making the unit that much more fun to fly.

And yes, I have also flipped it without crashing. Make sure that you have plenty of room because after the flip, it will travel 8-10' in the direction of the flip.

After a few days, crashing it numerous times, still intact and would recommend this to flyers with experience flying coaxials first. Throttle is the most important control of all types of crafts.

happy flying!

56 of 61 people found the following review helpful.
Tough and Great flying machine
By furnic
This is an incredible tough little flying machine and a great way to get in to the world of RC flying and quad copters.
I have purchased various indoor and outdoor RC flying toys and this is the first one that has made it intact after the first week.

First the toy, it comes with a decent 2.4ghz transmitter with a short rubber antenna which can't break unlike the old steel ones of years gone by. The flying instructions look quite complicated but who really reads a manual anyhow and the only way to learn is by practice and it does take a while.

The Quad comes fully assembled and once charged it is ready to fly. Charging time is about an hour and flight time is over 10 minutes. I think continuous fly time would be around 6 - 7 minutes but it will be a good few days until you can keep it in the air for over 1 minute.

We have crashed this endless times, landed in the tallest of trees, got tangled in branches, my garden is now littered with long poles made out of bamboo and pool cleaners to knock this out of 12 meter high trees and still it goes on flying.

It will take about 2 - 3 days until you get the hang of the controller (if you new to this) so if you can keep the temptation down, try and fly and hover just over head high to start off with.
Re the flying, it can do amazing things - it will hover in one spot, turn 360 degrees and circle, go forward and backwards (this takes a bit of time to master) it has a button to do front and side flips, everyone goes ahhhhhhhh when you do them.

The highest I have taken this up is around 33 meters (about a 100 feet), I don't think it will go much higher and the wind at that height gets a bit strong and I'm scared in may just fly away so I haven't ventured that high for too long.
My longest continuous flight so far, after a week, is about 4 minutes long.

after a week, there are still one or two buttons that I'm not sure exactly what they do, I think they may be to assist with the stabilizing - it is quite important when starting up to start it on a very level surface, if not, it just won't fly nicely.
I have also managed to fly it with a keychain spy camera, so it can do some basic FPV photography and its quite fun getting a birds eye view of your property.
If it survives another week of trees and crashing (though crashing a lot less now)then I will buy more batteries as once you get the hang of flying then waiting an hour to recharge can get a bit frustrating.

See all 453 customer reviews...More...

Mediabridge Sport Armband for iPhone 4 / iPhone 4S - Includes Front and Back Screen Protector (Black)

Mediabridge Sport Armband for iPhone 4 / iPhone 4S - Includes Front and Back Screen Protector (Black)..

Special Price Mediabridge Sport Armband for iPhone 4 / iPhone 4S - Includes Front and Back Screen Protector (Black) By Mediabridge

Most helpful customer reviews

76 of 79 people found the following review helpful.
Answer To My Prayers
By Alexandria Tikalsky
I am a long distance runner usually logging 10-25 miles a week and I've had a few dozen other armbands that have fallen apart over time. I'm a small 5'4 woman and every single armband I've ever had was too big and I constantly had to adjust them. This one has really strong velcro, I'd almost rather slide it down my arm than try to undo the velcro. The phone is not inside a plastic case in this one which makes it really easy to change songs, volume, check your distance, etc. I can't recommend this armband enough!

32 of 34 people found the following review helpful.
Not sweat proof
By D. Patrick
I bought this primarily for running (outside and on a treadmill). I have an Urban Armor Gear (UAG) case that I use for everyday protection of the phone. The phone must be removed from the UAG case in order to fit into this armband. The armband seems to hold the phone securely and I don't worry about it falling out... but there is a problem with using this for workouts. After a 4 mile run on the treadmill I pulled the headphones out of the headphone jack and realized that I was not getting in sound from my speaker. I immediately removed the phone from the armband and discovered the inside of the case and back of the phone (where the speaker is) was drenched in sweat. I removed the back cover from the phone and discovered the inside of the battery compartment was moist as well. The problem with this case is that there are cutout holes for the speaker, camera lens and flash. These holes allow the phone to have direct contact with your skin when it's strapped to your arm. Those holes allow perspiration in. I'm not sure why the designers felt it necessary to have these cutouts since the last thing you're going to be doing is taking pictures while this thing is strapped to you arm. This design would also be a problem if you find yourself running outside and get caught in an unexpected rain. I'll be looking for a different product to use for working out.

edit: there was a typo above. I meant to say "was not getting ANY sound from my speaker" - not "in sound" as was stated above. Luckily after drying out my phone the speaker now works again.

Overall this is a good product but it could be better. Use caution if using it while exercising. The company does seem interested in improving their products based on consumer's feedback.

68 of 79 people found the following review helpful.
Finally Found
By H. Swayne
Hey I had been looking for a armband for my generation 7 iPod Nano and I've finally found it. I went through three other armbands with little success mostly with the armband being too short with my 18" biceps. I asked questions on the Amazon Community about folks experience with this armband but they were right and wrong let me explain. Many who answered my question about whether this band would fit my bicep simply measured the band to find it was too short to fit an 18" bicep but they failed to do one thing; This armband STRETCHES making it more than adequate to fit snug and run with confidence!
I love that it does not cover the screen eliminating condensation buildup and sight distortion when sweating. The rubber fits snug and is thick enough to protect the unit should you drop it. Love it but be careful about the answers you get on products not everyone does investigative work!

See all 496 customer reviews...More...

Apple iPhone 4 8GB (Black) - AT&T

Apple iPhone 4 8GB (Black) - AT&T..

Special Price Apple iPhone 4 8GB (Black) - AT&T By Apple

Most helpful customer reviews

39 of 43 people found the following review helpful.
Not what I expected
By Kday26
I expected this phone to be new sealed in box.!it was marked new. Instead I got a open dented box with a used phone. It came with no charger no USB cord. I was extremely upset.

38 of 44 people found the following review helpful.
Apple iPhone 4
By Natalie Rodriguez
I received this iPhone in the mail quicker than I had anticipated. When I opened the package I saw that I had received a hand written letter by the seller congratulating me on my purchase and that he had accidentally miss labeled the phone on Amazon as a 8 GB phone when it was in all actuality a 16GB phone. He was very kind in letting me know that I could still keep the purchase as it was!!! I was so excited to see this. The phone was in perfect shape and worked wonderfully. There were no scratches or cracks in the phone. I was extremely pleased with the overall quality since it had been a previously owned and used. Overall, I would purchase again from this buyer!!!!

17 of 21 people found the following review helpful.
main menu button not working property
By Andrés
main menu button not working property so i am not recomended this iPhone , too much money for poor item

See all 97 customer reviews...More...

ELONGPRO 5PCS White 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod touch Nano F5M

ELONGPRO 5PCS White 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod touch Nano F5M..

GET ELONGPRO 5PCS White 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod touch Nano F5M By ElongPro

Most helpful customer reviews

12 of 14 people found the following review helpful.
kinda s***ty but worth the money
By westley vance
these things are cheep, but for the price, what else can you expect. all but one of them worked, and i have been using one every night for the last month and it still works. all in all, i have no complaints.

5 of 5 people found the following review helpful.
Exactly
By Roxad
This exactly what I needed because my sockets are a ways from my bed, chairs, so when I am playing a game I can charge it still.

6 of 7 people found the following review helpful.
Cheap
By Cory J. Chapman
All cords work so far. seem to be made well. 30pin connector slightly larger then OEM. DOES NOT FIT IN LIFEPROOF cases.

See all 203 customer reviews...More...

Sandisk 16GB MicroSDHC Memory Card, Class 4 (RETAIL PACKAGE)

Sandisk 16GB MicroSDHC Memory Card, Class 4 (RETAIL PACKAGE)..

GET Sandisk 16GB MicroSDHC Memory Card, Class 4 (RETAIL PACKAGE) By SanDisk

Most helpful customer reviews

151 of 157 people found the following review helpful.
Maximum storage, minimum hasle
By Ira B. Steinberg
Though I wish I had waited a couple of weeks to buy this card (the price dropped 30 dollars in the past two weeks), I have nothing but good things to say about the card. Easy to load, easy to read. I managed to put about 11 gigs on here in the first three days (lots of music) and the access has been flawless. Word of caution, be careful with the card reader. My first attempt led to a corrupted card which I had to return. May have been a manufacturing defect (bought from best buy, not from Amazon. Best buy charged 99.00). I reccomend loading the card in the device before adding data rather than using the reader and then inserting loaded card.

All in all, a miracle of storage on a tiny card. I eagerly await the 32 gb in a year or two.

120 of 127 people found the following review helpful.
Exactly what it says
By Joshua J. Susmarski
Great card, works great, is exactly what it says, and comes with SanDisk's standard warranty. A couple things to remember, 16 "gigabytes" in manufacturer terms equates to about 14.9 true formatted gigabytes (because a kilo for a computer is 1024). Also the MicroSDHC standard is the same card and interface as the old MicroSD; the difference is in the compression method. This means that many smartphones that didn't support SDHC when they were made can support it if the software is upgraded. An example of this is any Windows Mobile phone that has been upgraded to WinMo 6.1; 6.1 supports SDHC.

60 of 69 people found the following review helpful.
16 GB for my Google phone
By Karl Deitch
I bought this microSD card for my G1 phone and it works great no problems.

See all 1742 customer reviews...More...

Apple Iphone 4 16gb White Unlocked

Apple Iphone 4 16gb White Unlocked..

GET Apple Iphone 4 16gb White Unlocked By Apple

Most helpful customer reviews

24 of 26 people found the following review helpful.
Satisfied
By Sirod
Refurbished Iphone 4, in white, like new. No scratches, Loved it. Came with box and charger. No problems. Shipped to me in time.

32 of 37 people found the following review helpful.
Didnt came unlocked, but the seller fixed it. Great product and service.
By Ryan Young
***Updated review*** I bought this cellphone from TABLET DISTRIBUTORS and it was new, perfect, but didnt came unlocked (it was lockes o AT&T), but i contacted them by email and they unlocked it in a few minutes. So everything was fine, just in case dont panic (as I did) if it is locked, just contact them to change it.

By the way, I love my cellphone, it is my first Iphone and works flawlessly. Totally recommended.

20 of 23 people found the following review helpful.
Disappointed
By kendrick smith
The phone was not new or factory unlocked as stated, very disappointed was a mothers day gift, don't buy.

Smith

See all 132 customer reviews...More...

ELONGPRO 2PCS 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod White F1M

ELONGPRO 2PCS 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod White F1M..

Special Price ELONGPRO 2PCS 6ft/2M USB Cable Charger Cord for iPhone 3G s 4 4S iPad 2 iPod White F1M By DigiVox

Most helpful customer reviews

29 of 34 people found the following review helpful.
Don't buy it
By THTK
The cord has very poor quality and doesn't charge well and sometimes it doesn't work at all. I tried both cords that I received from the supplier with the original apple wall charger and the result is the same. Couple of times I tried using my Ipad 2 while the cord is plugged and I saw the battery use decreasing. I wanted to return it but the shipping cost to china will exceed the price I paid for the product. My advice, save your money and buy something original.

15 of 17 people found the following review helpful.
great cord
By heslarb
Love the length of this cord. Makes using my phone while it's charging so much easier. I can sit in bed or on the couch and be able to comfortably use my phone. Works great.

9 of 10 people found the following review helpful.
I had to write a review....WOW!!!!
By Faithful and True
I had to write a review, due to all the negative comments on purchasing this item, the two biggest negative comments being the amount of time it takes to receive the product and secondly the cords don't work. I ordered this item even after reading some terrible reviews, because I wanted to see for myself , I needed an extra cord for my iphone , and the price was really cheap. I am very glad I chose this purchase A) I made the order on 12/10/13 and then received the cords on 12/18/13 ONLY 8 days from china to Michigan!!!! My estimated delivery day wasn't, until January 17th .... B) Both cords do work!!!!.... I WIN!!! I read a lot of reviews where people said that either one cord didn't work or neither worked. I have two right here that work great.... I definitely recommend buying this product, I ordered them off amazon , I got 2 cords for $3 and the shipping was Free for me but on the label it cost the sender $5..... Don't think about it anymore , just go for it !!!!

See all 403 customer reviews...More...

For Apple iPhone 4 4G Touch Screen Digitizer and LCD Assembly - White (AT&T GSM Model)

For Apple iPhone 4 4G Touch Screen Digitizer and LCD Assembly - White (AT&T GSM Model)..

Buy For Apple iPhone 4 4G Touch Screen Digitizer and LCD Assembly - White (AT&T GSM Model) By Generic

Most helpful customer reviews

76 of 81 people found the following review helpful.
Best screen I have installed so far
By Kevin S.
I have been replacing screens for iPhones as a side business since the 1st gen iPhone back in 2007. This has been the most OEM like screen I have ever installed, especially for the iPhone 4. The glass is silky smooth and feels like it has the oleophobic coating just like the OEM's (it doesn't, but feels like it, and oil wipes off a little easier than one that doesn't). The display is bright, the proximity sensor works better than the original (it actually works). Overall I'm very glad that I got this screen for myself when my screen shattered after a rough fall while snowboarding. I'll absolutely recommend that any customers I have that want to replace their screens go with this one, even if they had a black iPhone.

Note that this screen is only for the AT&T iPhone 4, as mentioned by the reviewer below.

8 of 8 people found the following review helpful.
Too many defects
By ML
This is the 5th LCD replacement I buy and install. Having a house full of teenagers, the LCDs are a big commodity in my household.
This is the worst quality LCD I received so far. There is a white stripe at the top of the LCD, A finger like stain in the middle of the screen and a couple of dead pixels.
I'm not expecting Apple quality on these replacement models but I expect them to at least be defect free.

23 of 28 people found the following review helpful.
Quality product that installed easily *Ordered from seller EPC USA*
By KR
NOTE: I purchased this from Amazon seller "EPC USA". I cannot vouch for other sellers offering this product.

This screen came with a set of tools, most of which were useful. The screwdriver began stripping toward the end of the installation, but lasted for the entire installation.

I installed this screen in about 20 minutes using a youtube instructional video. Be very careful with the connectors. The screen has two flat connectors, which must be carefully aligned and pressed onto the phone connector very firmly. If the connector is even slightly loose, the screen or sensor may not work properly, and you will have to disassemble the phone again.

The screen picture quality is very good... only a very small difference in color reproduction from the original screen. Sharpness (regarding the iphone4) is the same.

Touchscreen performance is just as good as the original screen.

I did notice that the replacement is not as fingerprint-resistant as the original screen (not a major problem).

I had to replace the screen twice, both times using this product. The first replacement screen cracked upon dropping..... and the replacement glass does not appear to be as durable as the original iphone glass.

The screen does seem to be very slightly thicker. The Home button is slightly more recessed in this screen than it was in the original screen. For this, the lower durability, and the lack of fingerprint resistance - I give this 4 stars instead of 5.

Overall, this is a quality product and a much better DIY alternative to paying $100+ for a replacement screen, or $300+ for a replacement phone.

See all 303 customer reviews...More...

Netgear ProSAFE 24-Port Gigabit Smart Switch with PoE and 4 SFP Ports (GS728TP-100NAS)

Netgear ProSAFE 24-Port Gigabit Smart Switch with PoE and 4 SFP Ports (GS728TP-100NAS)..

Grab Now Netgear ProSAFE 24-Port Gigabit Smart Switch with PoE and 4 SFP Ports (GS728TP-100NAS) By Netgear

Most helpful customer reviews

9 of 9 people found the following review helpful.
Great PoE Switch
By gray-eagle
The main reason I selected this switch was the energy budget of 192 watts. I did not need half this much but the next size down fell short by about 10 watts. When you first power up, it takes longer than non PoE switches to boot. It has to look at the power demands in addition to IP address and other constraints.

That said, I installed this switch three months ago to connect to and to power multiple wireless access points for a large multi story building. Configuration is accomplished via browser. After several reboots during the configuration it has not been necessary to reboot or in any other way deal with this switch. If I do have to deal with it, it has it's own IP address so I can log into it remotely.

2 of 2 people found the following review helpful.
Switcharama Powerama
By Brian Flores
One of our favorite 24 poet POE switches. Install the crap out of them. Powers polycom phones, Access Points, and IP cameras. And, has 4 SFP GBIC ports. Getcha-sum.

2 of 2 people found the following review helpful.
Great PoE for the price
By FLI IT Dept
we bought two of these for a new place and they work perfectly. They are connected with a fiber backbone and one of them is connecting and giving power to 12 Cisco access points, the second one connects 6 access points and 6 phones with the PoE.
We couldn't be more happy about them.

See all 8 customer reviews...More...