Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty

Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty..

Special Price Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty By Halo Screen Protectors

Most helpful customer reviews

20 of 21 people found the following review helpful.
Amazing customer service.
By The Special Reviewer
Ordered these protectors when the moto x first came out. Felt nice but the cut/shape was not right. Partially covered the bottom mic. Anyways, the company saw my review and they sent me an email the issue had been fixed and all the users who had receive the old screen were sent 3 new corrected screen protectors. Got my 3 and put one on and it fits perfect. Love the feel of these, they are not gummy like the competition. Great screen protectors from a great company.

28 of 31 people found the following review helpful.
If you want a crystal clear, full screen screen protector, buy these
By Movie Guy
These protectors are vastly superior to what came with my Moto X. They cover the whole screen, are cut out perfectly to expose all of the sensors. Some other brands fail to expose the ambient light sensor to the left of the earpiece which might make your phone dim the display more than it should if you have the phone set to automatic brightness.

The protectors also have a protective film on both sides - one that you remove before installation (the one on the "phone side" of the film) and one that you remove after installation (on the "out side" of the film). The one you remove after installation protects the protector if you use a plastic smoothing card to prevent bubbles during the install. One note - the little tabs on the discard protective films both say "peel off before applying" - that's not right - you'd peel off the "Step 1" film before applying and peel off the "Step 2" film after applying.

In my opinion the screen protectors are the perfect thickness. Some are so thick that they leave an annoying ridge at the edge of the protector. Others are so thin I don't think they'd do much to protect the screen from a ding.

These are also crystal clear. Since they are a clear protector and not a matte protector they are going to show finger smudges, etc. - there's no way around that but to go with a matte protector. In my opinion putting a matte protector on an X defeats the whole purpose of having such a crisp, sharp display.

One reviewer commented about dust. Like any protector, if you get dust under these you'll have a bubble. The way I avoid that is to use a spray duster (like you get for a computer keyboard etc.) to spray the area I'll work in and make it dust free. The protector generates a static charge when you peel the film off and if there is any dust in the area it will be drawn to your protector. Then I clean the screen with a lint free wipe and 91% alcohol. You can use the cloth that comes with the protectors but I use the ones that you buy at an optometry shop. Get all the oil and smudges and crud off the screen. Clean it several times if necessary until it is spotless. Then use the air duster to blow the screen off and make sure it's clear, and dust the surrounding area one last time.

When I apply the protector I apply it long edge first. If you apply short edge first it's hard not to get it crooked. I don't peel the whole protective film off at once. I peel the film back part way along the long edge, and then preposition and reposition the long edge until it is exactly at the edge of the glass and perfectly straight. Then squeegee the protector on working from the middle of the film to the top and bottom edges to keep bubbles out as you also work from the protector on from the left side of the phone to the right, peeling the protective film back from the underside as you go. It's hard to explain - a video would work better. Enjoy!

8 of 9 people found the following review helpful.
Great for Moto X
By Eric
These screen protectors fit the Motorola Moto X perfectly. Once the protector is placed on the screen it adheres well and will not move around. Before I applied mine, I cleaned the screen on my phone with a touch screen wipe (not supplied) then wiped it down with the micro fiber cloth which is supplied. It is important to eliminate any dust that's on the screen before putting a protector on. Dust will cause bubbles between the protector and the screen.

The protector has 2 layers that need to be removed while placing it on the screen of your phone. An easy way to eliminate dust is to peel back just a little on the upper left corner of the inside layer on the protector. Place the small exposed portion of the protector on your phones screen and make sure it is lined up with rest of the screen. Slowly finish peeling on the inside layer of the protector while at the same time attaching it to your phone. Putting the protector on this way will eliminate the chances of dust provided you are doing this in a clean area. Once the protector is attached you can smooth out any bubbles with the edge of a credit card. Once any bubbles are out then remove the outer layer of the protector and you're good to go.

My advice is to use this method when putting this screen protector on your phone. If you peel back the inner protective layer all at once then try putting it on your screen, the static electricity will attract dust onto the protector and it won't adhere properly and it will look terrible. Don't waste a protector. Take my word for it. If done right, you can't even tell you have a protector on your phone.

These protectors are a small price to pay to keep your phone safe and looking new. I imagine with normal use, this pack, which includes 3 protectors, will last a very long time. I am happy with my purchase and would recommend it.

See all 535 customer reviews...More...

Panasonic WES9020PC Combo Replacement Shaver Foil and Blade Set

Panasonic WES9020PC Combo Replacement Shaver Foil and Blade Set..

Grab Now Panasonic WES9020PC Combo Replacement Shaver Foil and Blade Set By Panasonic

Most helpful customer reviews

27 of 30 people found the following review helpful.
Best blades for the best electric shaver, period.
By SouthPaw Guitar
The blades and foil are great and make my panasonic electric razor like new again. The Nano arc iv is the best electric out there, braun pulsonic (which I own) doesn't come close to the shave you get from the panasonic. I have owned every brand and keep coming back to the panasonic, plus you can shave in the shower with your favorite foam. Don't waste your money on hyped products like the pulsonic or norelco. Even the lower end panasonic models in the $99 range are better than the $300 pulsonic. Don't say you weren't warned!

20 of 22 people found the following review helpful.
Like New, Simple and Easy
By Quixote One
I've been very pleased with my Panasonic shaver since day one. It gives me a close, smooth shave with little effort and minimal skin irritation, performing better in both regards than the Norelco models I've used for years previously. It's also far easier to clean and maintain.

I purchased this replacement foil and blades set not out of necessity -- the originals that came with the shaver weren't worn out yet -- but to save myself the hassle of having a day come where the foil DID eventually wear out and I'd be without a shaver until I could get a replacement. I'm happy to say that changing out the blades couldn't be simpler (just pop off the old ones and pop on the new), and the replacement foil comes as part of a complete new plastic head "shell" assembly, the same one you routinely remove and replace while cleaning the shaver, so it's no problem to replace, either.

I do notice some improvement in shaving performance since replacing the originals with this kit -- not that the shaves I was getting had degraded badly at all, but I can tell the difference that brand-new blades make. Since the originals are still perfectly usable, I've put them away in the packaging from the replacement kit for safekeeping, as an "emergency backup" just in case I do something to damage the new ones.

10 of 10 people found the following review helpful.
combo replacement
By sam
The WES9020pc has the 3 parts needed to restore the ES8243 to like new condition. The new shaver foil comes mounted in a new head. The 2 old blades pull easily off and the new blades easily snap on as replacements. For a lot less than half the price of a new shaver you can have a new shaver.

See all 151 customer reviews...More...

ProKit for Samsung Galaxy S3 i9300 I747 T999 Pebble Blue Replacement Screen Glass Lens Kit

ProKit for Samsung Galaxy S3 i9300 I747 T999 Pebble Blue Replacement Screen Glass Lens Kit..

Buy ProKit for Samsung Galaxy S3 i9300 I747 T999 Pebble Blue Replacement Screen Glass Lens Kit By s3 prokit adhesive

Most helpful customer reviews

90 of 95 people found the following review helpful.
Perfect. Did the job well!
By Ari
Ok, for any review stating that their glass had scratches, look again. I'm sure once in a blue moon there might be a scratch. However, I'm glad someone mentioned there are 3 layers of protective film to peel off the glass otherwise I would have missed it. There is a easy peel off film on each side of the replacement glass that extends past. But on the inside of the glass there is a 3rd film that is cut exactly the same size and is almost invisible unless you knew it was there. And yeah, until I took that last piece off I was freaking out that I got cheated into a shody product. But it was crystal perfect. The glass is not OEM but you can't tell at all. It's a pretty exact fit, maybe just a micro touch small at the edges but the difference would only be noticeable to the perfectionist's eye. From a distance of more than a foot, no one can tell. I'll trade that any day to having spider cracks all over my screen.

The tools work great. I didn't have any issues with mine melting. I used an embossing tool (which is pretty much a heat gun) but a hair dryer can be used too. Even though it shows in the picture, I completely overlooked that extra glue was included. Most glass replacements this isn't necessary because the OEM glue has plenty from the original build, but this was a nice perk nonetheless.

I'm not a gadgety person, I'm a house mom. Anyone can do this! If you watch a few different youtube tutorial videos to really get to know the details of the process, prepare all your tools to start and above all, TAKE. YOUR. TIME. to do it carefully, any novice can replace their galaxy 3 cracked screen. Take your battery/sim card/memory cards out before you start so they don't get damaged by the heat. It's is optional (but highly recommended) to take out your phone's circuitry too (many youtube vids on this too) to protect from heat damage.
Be aware though that if your digitizer (touch sensory)/LCD screen layer is damaged (you'll know this if your screen is rainbowy/black around the cracks or the picture is distorted), then you'll need buy a whole new LCD screen and glass replacement. You may want to send it for repair at that point unless you feel ambitious enough for the extra challenge.

Overall, mine came out perfect! I'll remember to put a protection case on this puppy this time. Screen protectors and ghost armor work great for dings and scratches. But my phone likes to cliff dive from any height to the floor.

37 of 38 people found the following review helpful.
Excellent product
By Bryan R Oakley
Heated with hairdryer, pryed off old screen and adhesive, replaced with supplied adhesive and new glass screen. only tools I used were the plastic prybar and the guitar pick. Make sure to clean the LED screen REALLY well before replacement. many great videos on youtube.

51 of 57 people found the following review helpful.
This is awesome!
By mh9
My kid broke the glass on his Verizon SCH-I535 in a motorcycle crash. He is OK, the phone still works but the screen broke. I wasn't sure if this product would fit because the description said i9300, I747, T999 but not i535. After a bit of research that said it would fit, I gave it a try. Turns out, when you get the screen off, "i9300" is painted on the little ribbon cable for the Menu and Back buttons.

DISCLAIMER: This worked for me. Won't guarantee it will work for you. You are on your own, but it worked for me!

I can't stress this enough...research, patience, YouTube videos, patience, breathe, more videos, patience, more research and even more patience!

Youtube videos, heat gun, plastic tools only and patience while taking the screen off. Start at the ear piece end, not the home button. Careful when you get to the home button and don't break the ribbon cable that is glued to the back of the Menu and Back buttons. The ribbon cable will come off in one piece if you are careful.

Once I got the screen off, I wasn't exactly sure how to proceed because, as others have said, there were no instructions for the assembly. I sent a quick question to the help email address asking how to apply the adhesive strip, received an almost instant response (from a real person even!) and most of my worries were gone.

"After your old screen is removed you will notice a black gasket on the outer edge. Remove it completely. Clean with swab and alcohol. Take the clear liner off the back. Place sticky part to fit outline of the phone. Apply pressure to the edges. Remove the blue film leaving the black gasket / adhesive. Then complete the install of your new glass."

More patience while slowly, carefully using tweezers, alcohol, q tips (and I used Goo Gone) to get the black gasket and all the glue off. Watch out for the ear piece and home buttons. Mine popped off but I was able to position them back into place. I spent almost an hour getting all the glue off. There is a lot of glue all over the place! Some don't, but mine even had glue between the glass and the digitizer which will roll off when you gently rub it with your fingers. I thought I was done until I got a magnifying glass and saw even more glue! Time for even more patience!

Then I panicked when I saw all the alcohol residue fogging up the digitizer. I used Sprayway Glass Cleaner from Costco, a lint free cloth and a lot of deep breathing to clean that off. Panic averted.

Patience again when applying the new adhesive. Careful, that stuff is really sticky and sucks to anything it touches. Again, I carefully worked down from the ear piece towards the home button. I personally stopped before the home button and removed the blue film because I couldn't get the ribbon cable through the hole with the film in place. Stressful times again because the ribbon cable stuck to the adhesive but I was eventually able to get it all sorted.

Once the adhesive was in place, I used another lint free cloth to clean the digitizer without touching the adhesive. You know what it is like to have a spec of dust under your screen protector? Then you can just imagine how much it will bug you if there is dust between the screen and digitizer!

Ok. Clean? Ready? Time for the glass.

NOTE: As others have said, the glass is not scratched. There are three protective films on the glass. Two of them are very obvious, one on the front, one on the back. The third film on the back of the glass is very hard to see because it is closely cut to the shape of the glass and was difficult to get off.

Patience yet again! This time start at the home button end and carefully attach the ribbon cable to the menu and back buttons on the glass. This is important because they supply the light and response to the buttons when you press them. Be sure the home button and ear piece are in place, take another deep breath and carefully, patiently position the glass in place...because once that glass is in place, it ain't going anywhere...then press gently but firmly around the edges to anchor it.

Now, if you did it right, put the rest of your phone back together, power it up and pat yourself on the back for a job well done and saving yourself a lot of cash!

(FYI, really only minus 0.5 star for no instructions but they won't let me give 4.5 stars.)

See all 355 customer reviews...More...

Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement)

Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement)..

Grab Now Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement) By Photive

Most helpful customer reviews

147 of 149 people found the following review helpful.
Great Batteries!
By bkbz
I have used these batteries for a couple of weeks now. I can tell no difference from the original Canon batteries other than these last longer. I use 2 batteries at a time (grip), and have snapped ~1,000 shots without the battery bar going down once.

These batteries are packaged well and shipped very fast.

It took about 2 hours to get to a full charge out of the box. If you are looking for T2i batteries, look no further!

**UPDATE**

I have had these batteries for a few months and still feel the same way as mentioned above. I have been using the batteries without the grip (1 battery at a time) and seems to get about 20-30% more shots than the stock Canon battery. Recharge time is about 2-3 hours from dead. Spend your savings on lenses, not "Canon" branded batteries.

75 of 76 people found the following review helpful.
Great battery life, but keep a watch handy
By kronabus199a
I just bought this battery, and decided to do a side-by-side comparison between a 3 week old Canon battery, and this brand new battery.

First off, both batteries were tested on a Canon T3i, at 1920x1080 24fps, with a Sandisk Ultra 16GB class 10 and a Transcend 16GB class 10 as the SD cards of choice. Also, both batteries were tested with continuous recording, 'til each battery died.

The Canon battery lasted approximately 90 minutes, while the Photive battery lasted approximately 86 minutes. So, it holds up within just a few minutes against a brand name battery, which is amazing for the price.

However, there is a catch. The battery meter does NOT show the battery life. It will go from full to dead with absolutely no indication. Not even the halfway mark. As it states in the title, keep a watch/timer handy to keep track of your battery life.

Other than the guessing game you may play with its life, it's well worth the price tag given how long it lasts. And the fact that you can shoot 2 full 16GB cards worth of video without changing batteries is big plus.

I would recommend going with the STK battery, as it lasts about a minute longer, and costs $2 less. And neither of these batteries report to the battery meter.

63 of 66 people found the following review helpful.
Photive LP-E8 battery
By TA Greene
Great buy. I purchased this product as a second battery for a Canon T2i camera. This battery does a good job. It operated my camera for over 700 photos. 100+ photos were with flash and auto focus operation. Recharging this product in the Canon charger was the same as the original Canon battery.

See all 654 customer reviews...More...

ProKit for Samsung Galaxy Marble White Replacement Screen Glass Lens Kit S3 i9300 I747 T999

ProKit for Samsung Galaxy Marble White Replacement Screen Glass Lens Kit S3 i9300 I747 T999..

Buy ProKit for Samsung Galaxy Marble White Replacement Screen Glass Lens Kit S3 i9300 I747 T999 By s3 prokit adhesive

Most helpful customer reviews

191 of 195 people found the following review helpful.
Great Product, Lacks Thorough Instruction
By Anonymous Consumer
My wife's GS3 had the screen shattered into one million billion pieces that somehow remained in place. The phone was perfectly operable and you could still see the LCD ok under the many thousand shards of broken screen. Sprint told her she was S.O.L. and would have to replace the phone outright, and I came across this product when searching for other options.

Others have done a decent job of explaining the product, but I wanted to clarify a few things:

- The kit comes with a bunch of tools, most of which I did not use. The two blue plastic pry-bar tools (included) and a pen-style X-acto knife I already had got the job done.

- Printed on a paper that came with the kit was a youtube link to a video of a guy doing the repair that was pretty good, but other than that there were no printed instructions. It was not clear if the guy in the video is in any way affiliated with the company that I bought the screen from. You would do well to search for a couple videos of people doing this repair.

- Several videos / reviews I have seen indicate that there is no adhesive under the clear part of the glass. I cannot speak for them, but on OUR white Sprint GS3 I can tell you that YES 100% there was definitely absolutely without any doubt adhesive under the whole screen. This was the biggest pain in the ass part of the whole replacement, but was also the reason that the phone had continued to be usable with the totally shattered glass. Clear adhesive held the tiny slivers of glass shards in place from below.

- Most of the videos I have seen have smaller breaks or cracks, where the glass is in 5 or 6 pieces that get lifted off with relative ease in 10-15 minutes. This was not the case with my phone, and as such it took way longer - at least an hour, maybe hour and a half. Totally worth it though.

- Heat! HEAT HEAT HEAT! Heat is your friend, and the crux of making this a successful DIY repair. I used my wife's high end blow dryer. I did not have an infrared thermometer, but here is what I found empirically: Heat the glass. Then keep heating it. Then heat it some more till you think you are hot enough. Then heat it more. You cannot heat it too much, at least not with a blow dryer. You might be able to foul it up with a heat gun, so don't to that - but this is a blow dryer. Like Abraham Lincoln said about the axe and the tree - spend your time on the prep and the actual job goes 10x faster. Still heating? Good. Keep going. Now keep heating it. It should feel like it takes forever. You should be getting bored. Keep heating. You get the idea.

- There are (2) things holding the glass to the phone. 1) There is a thin black adhesive gasket under just the perimeter of the glass. It is flat like construction paper, but sticky on both sides. The bottom sticks to the handset and the top sticks to the glass. You cannot see it while the glass is still on. If you have the white phone, see how the glass is white around the speaker then turns clear over the actual screen? And you see how that white glass on top also has a thin band that comes down the side of the viewscreen? The sticky black gasket is under the white part of the glass. The gasket is wider at the top and bottom, and there are holes cut out of the gasket for the camera, speaker, bottom button etc. 2) There IS a clear adhesive sheet under the entire clear glass screen that holds the glass to the digitizer that senses your touch. Once I thought I had gotten it hot enough, I was able to lift some of the broken glass off - but the clear, rubbery adhesive stayed stuck to the digitizer. This made a lot of extra work and smudgy mess. This is how I learned that I had not used enough heat. Later, once I heated way more, I found that once it is hot enough, you can lift the glass off and the adhesive comes right up on the underside of the glass, leaving a nice clean digitizer. This was way easier to clean up after - waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaay easier. What are you waiting for? Get that heat back on there. HEAT!

- WARNING !!! - on the left and right side of the bottom button are the 2 little light up areas - "go back" (u-turn) on the right and "menu" on the left. In these areas, the glass is not stuck to digitizer, but rather a paper thin ribbon cable that starts on the left ("menu") and goes just over the top of the pushbutton to the right. It would be very easy to cut right through this thing with a blade, so don't do it! You should have started prying at a top corner by the phone's speaker, so by the time you get down to the button you have a good amount of the screen lifted already. If you are using enough HEAT you should be able to GENTLY peel the glass off of the ribbon cable. HEAT!

- Once I finally got most of the clear, rubbery adhesive off of the digitizer, I was able to clean off the smudges with a soft cloth and some rubbing alcohol. I spent a lot of time on this since this would not be cleanable once the new glass went on. This step did NOT require heat.

- The new double-sided black sticky gasket that came with the screen was real thin - REAL thin. I was not able to get it to lay totally flat along the edge side, but lined it up pretty good on the top and bottom. Once it was in place I pressed the new glass firmly into the gasket, and make sure that the edges of the new glass are slightly recessed into the silver bezel. I hit it with the heat for a bit and pressed some more. Lots of pressing and rubbing, until the phone was cool - I really wanted that new adhesive to set.

All in all, this did take quite a bit longer than I was expecting (1 to 1.5 hours), but my screen was especially destroyed. I am extremely happy with the results, especially for the price. They could charge double for this kit and it would still be worth it. If you are patient and meticulous you should have no trouble doing this repair. Based on the fact that you have read this far down this review, I would say you are qualified! Good luck!

200 of 210 people found the following review helpful.
Good tools - be careful using them
By Matthew
The kit arrived quickly and contained all items advertised. I had been perplexed about the blue adhesive sticker pictured (not realizing that the the blue film merely is the transport mechanism for the thin black strip of tape that follows the outline of the phone, which peels off of the blue film.

The process, when done correctly, only takes 10-20 minutes. I ended up breaking the digitizer in the process of removal and now am onward to other steps, but thought I'd share my tips from the newbie point of view. There are several youtube videos- and I knew the risk I was taking. That said, the videos I saw did not cover enough preparatory understanding of how the glass is attached by an adhesive strip along the *edge* of the phone frame only. I think it would be helpful for the seller of this replacement product to show a step by step video of their own to ensure higher customer satisfaction. My 3 star rating is due to lack of adequate documentation.

1. The glass is attached to the phone by a thin black seal around the *edges* of the phone frame. The underside of the main glass is not sticky and does not need help being separated from the digitizer. The seal is about as thick as a small rubber band. There is not a layer of adhesive under the main screen glass itself. That little piece of knowledge would have prevented the error that led to my breaking the digitizer.

2. Before getting started, I tapped the front of my phone so the broken glass would not get all over the place. I removed battery and sim cards in advance.

3. I used a regular hairdryer on low / hot. It does not take long to heat the adhesive along the phone edges.

4. After a minute or so, you can start sliding the tools under the edge of the frame (kind of like changing a bike tire). Start at the earpiece end (the top) of the phone near the center and start working your way around.

5. Gradually slide the two levers along the edge of the frame as you heat and separate more adhesive along the edge of the phone. If you can use tweezers, pull the adhesive strip out as you go.

6. Do not slide the tools into the main screen area - keep it to the edges only. MY ERROR: I thought there was an adhesive film layer under the glass that needed to be pried loose. The only adhesive is at the edge of the phone frame. My ignorance (and failure of adequate mention in the youtube videos) led to me breaking the digitizer when I slightly levered the glass away from the frame early in the process.

7. Also -- do not wedge your tools *under* the digitizer and pry it loose. I did that too and cracked it in another spot.

8. When you get to the speaker end you need to know in advance that there is a small flap of electronics that IS glued to the underside of the glass -- the left and right buttons (that light up to the left/right of the main button). Be careful and gradually separate that flap from the original glass. Do not accidentally tear or remove that flap!

When I was done removing the glass, I knew I had broken the digitizer and failed. I powered it up just to see what would happen. The startup sound played and the two lights at bottom worked, but the screen did not illuminate i.e. was broken.

66 of 76 people found the following review helpful.
Great ... even better than the original
By Zak
My galaxy S3 felt and the screen glass broken ... I searched the internet for a proper glass and decided to buy this one because : 1- it had Samsung logo, 2- it have the tools required for the process , 3- it have the pre-cut adhesive .... I was lucky that this screen glass returned my phone to it's original condition ....
Note: I failed to install the glass on the first time and I felt disappointed, but then I fount that I didn't remove the old adhesive and installed the new one above it so I opened the glass again and removed the old one... and the touch works great
thanks for this product. don't buy this product if your touch screen do not work properly .. this is only glass replacement

See all 248 customer reviews...More...

Samsung Original OEM 1650 mAh Spare Replacement Li-Ion Battery for Samsung Captivate Glide/Galaxy S 4G/Vibrant 4G/Focus - Non-Retail Packaging - Silver

Samsung Original OEM 1650 mAh Spare Replacement Li-Ion Battery for Samsung Captivate Glide/Galaxy S 4G/Vibrant 4G/Focus - Non-Retail Packaging - Silver..

Grab Now Samsung Original OEM 1650 mAh Spare Replacement Li-Ion Battery for Samsung Captivate Glide/Galaxy S 4G/Vibrant 4G/Focus - Non-Retail Packaging - Silver By Samsung

Most helpful customer reviews

83 of 92 people found the following review helpful.
Works great, looks identical to OEM
By Tahoe Jones
It took a surprising amount of time trying to locate the correct OEM battery for my wife's T-Mo Samsung Galaxy S without paying full retail or getting a counterfeit/knock-off. I was a little uncomfortable with the reviews on this one, but as it turned out it looks identical to the OEM battery that came with her phone, and, after a week of use, works great. The battery arrived very quickly via First Class Mail. Two thumbs up!

55 of 60 people found the following review helpful.
Fake Battery
By Lyle J. Nielsen
Some dead giveaways to fake OEM batteries: peel back the label and see if there is an inscription on the cell of where the product was manufactured, if not, it's fake. Also, look at the color of the underside of the label, Samsung's has a graphite colored finish, counterfeits have silver. Take the label completely off and you might find a strange black plastic insert on the backside of the cell. What's this? It's an insert used on counterfeits to make the battery seem larger than it really is. At first, this battery will be just fine. Give it a month or two of use, and it will begin to swell and die out. All of the negative reviews seem to be from users that have used this battery for longer than a month. Buyer beware. Spending the full retail price for an OEM is really the only way to guarantee you're getting the real thing. I purchased mine from Prime and got a fake. Amazon refunded my order.

36 of 40 people found the following review helpful.
Battery
By tg
Exactly what I expected. So glad to have extra battery. Needed battery mine wouldn't hold a charge any longer.
Sent quickly.

See all 1172 customer reviews...More...