Tampilkan postingan dengan label High. Tampilkan semua postingan
Tampilkan postingan dengan label High. Tampilkan semua postingan

Kamis, 24 Desember 2015

HP 564XL /564 High Yield Black and Standard C/M/Y Color Ink Cartridges, (D8J67FN#140) w/Media Value Kit 4/Pack

HP 564XL /564 High Yield Black and Standard C/M/Y Color Ink Cartridges, (D8J67FN#140) w/Media Value Kit 4/Pack..


HP 564XL /564 High Yield Black and Standard C/M/Y Color Ink Cartridges, (D8J67FN#140) w/Media Value Kit 4/Pack

Special Price HP 564XL /564 High Yield Black and Standard C/M/Y Color Ink Cartridges, (D8J67FN#140) w/Media Value Kit 4/Pack By HP

Most helpful customer reviews

0 of 0 people found the following review helpful.
5HP printer ink
By Rodney J. Fink
Like other HP printer ink this shipment was fine and worked well in the printer. No problems and will reorder when needed.

0 of 0 people found the following review helpful.
5Good value!
By Jean M Fisher
Hate to pay for ink cartridges but if you need them you have to buy them, so this is a good deal.

0 of 0 people found the following review helpful.
5Show me the MONEY
By Callie Reisch
These more expensive cartridges worked in my HP printer. The savings I anticipated were less than the actual savings I'd hoped for.

See all 4 customer reviews...More...


Minggu, 20 Desember 2015

Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty

Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty..


Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty

Special Price Halo Screen Protector Film High Definition (HD) Clear (Invisible) for Moto X (3-Pack) - Lifetime Replacement Warranty By Halo Screen Protectors

Most helpful customer reviews

20 of 21 people found the following review helpful.
5Amazing customer service.
By The Special Reviewer
Ordered these protectors when the moto x first came out. Felt nice but the cut/shape was not right. Partially covered the bottom mic. Anyways, the company saw my review and they sent me an email the issue had been fixed and all the users who had receive the old screen were sent 3 new corrected screen protectors. Got my 3 and put one on and it fits perfect. Love the feel of these, they are not gummy like the competition. Great screen protectors from a great company.

28 of 31 people found the following review helpful.
5If you want a crystal clear, full screen screen protector, buy these
By Movie Guy
These protectors are vastly superior to what came with my Moto X. They cover the whole screen, are cut out perfectly to expose all of the sensors. Some other brands fail to expose the ambient light sensor to the left of the earpiece which might make your phone dim the display more than it should if you have the phone set to automatic brightness.

The protectors also have a protective film on both sides - one that you remove before installation (the one on the "phone side" of the film) and one that you remove after installation (on the "out side" of the film). The one you remove after installation protects the protector if you use a plastic smoothing card to prevent bubbles during the install. One note - the little tabs on the discard protective films both say "peel off before applying" - that's not right - you'd peel off the "Step 1" film before applying and peel off the "Step 2" film after applying.

In my opinion the screen protectors are the perfect thickness. Some are so thick that they leave an annoying ridge at the edge of the protector. Others are so thin I don't think they'd do much to protect the screen from a ding.

These are also crystal clear. Since they are a clear protector and not a matte protector they are going to show finger smudges, etc. - there's no way around that but to go with a matte protector. In my opinion putting a matte protector on an X defeats the whole purpose of having such a crisp, sharp display.

One reviewer commented about dust. Like any protector, if you get dust under these you'll have a bubble. The way I avoid that is to use a spray duster (like you get for a computer keyboard etc.) to spray the area I'll work in and make it dust free. The protector generates a static charge when you peel the film off and if there is any dust in the area it will be drawn to your protector. Then I clean the screen with a lint free wipe and 91% alcohol. You can use the cloth that comes with the protectors but I use the ones that you buy at an optometry shop. Get all the oil and smudges and crud off the screen. Clean it several times if necessary until it is spotless. Then use the air duster to blow the screen off and make sure it's clear, and dust the surrounding area one last time.

When I apply the protector I apply it long edge first. If you apply short edge first it's hard not to get it crooked. I don't peel the whole protective film off at once. I peel the film back part way along the long edge, and then preposition and reposition the long edge until it is exactly at the edge of the glass and perfectly straight. Then squeegee the protector on working from the middle of the film to the top and bottom edges to keep bubbles out as you also work from the protector on from the left side of the phone to the right, peeling the protective film back from the underside as you go. It's hard to explain - a video would work better. Enjoy!

8 of 9 people found the following review helpful.
5Great for Moto X
By Eric
These screen protectors fit the Motorola Moto X perfectly. Once the protector is placed on the screen it adheres well and will not move around. Before I applied mine, I cleaned the screen on my phone with a touch screen wipe (not supplied) then wiped it down with the micro fiber cloth which is supplied. It is important to eliminate any dust that's on the screen before putting a protector on. Dust will cause bubbles between the protector and the screen.

The protector has 2 layers that need to be removed while placing it on the screen of your phone. An easy way to eliminate dust is to peel back just a little on the upper left corner of the inside layer on the protector. Place the small exposed portion of the protector on your phones screen and make sure it is lined up with rest of the screen. Slowly finish peeling on the inside layer of the protector while at the same time attaching it to your phone. Putting the protector on this way will eliminate the chances of dust provided you are doing this in a clean area. Once the protector is attached you can smooth out any bubbles with the edge of a credit card. Once any bubbles are out then remove the outer layer of the protector and you're good to go.

My advice is to use this method when putting this screen protector on your phone. If you peel back the inner protective layer all at once then try putting it on your screen, the static electricity will attract dust onto the protector and it won't adhere properly and it will look terrible. Don't waste a protector. Take my word for it. If done right, you can't even tell you have a protector on your phone.

These protectors are a small price to pay to keep your phone safe and looking new. I imagine with normal use, this pack, which includes 3 protectors, will last a very long time. I am happy with my purchase and would recommend it.

See all 535 customer reviews...More...


Sabtu, 05 Desember 2015

Streamlight 88040 ProTAC HL High Lumen Professional Tactical Light with white LED and Holster, Black

Streamlight 88040 ProTAC HL High Lumen Professional Tactical Light with white LED and Holster, Black..


Streamlight 88040 ProTAC HL High Lumen Professional Tactical Light with white LED and Holster, Black

GET Streamlight 88040 ProTAC HL High Lumen Professional Tactical Light with white LED and Holster, Black By Streamlight

Most helpful customer reviews

167 of 170 people found the following review helpful.
3The Streamlight Protac HL works well in the end, but not without hastle and more money spent in the begininng.
By Andrew
I bought this flashlight because I work security detail in an ugly part of my city, and when I need a flashlight, I need it to work consistently every time - because my life could depend on it. For a standard flashlight, that may be too much to ask for, but for a flashlight of this reputation and price, I was expecting much more. I bought the Streamlight Protac HL 2 months ago. It worked for about a month (long enough for the return time to expire), and then the 600 lumen output drastically decreased. I assumed it was exhausted batteries, and so I bought a new package of batteries. The Streamlight did not regain its 600 lumen output. It put out less than 200 lumen, in my estimations. At times the light did not turn on at all when the switch was pressed. I assumed that this was my fault, that maybe I didn't know how to use the Streamlight's "ten-tap" technology. After all, I couldn't find anything on the internet suggesting that anyone had ever had a problem with a Streamlight. I even bought another package of batteries, just to be sure that expired batteries weren't to blame. Sure enough, it was a problem with the flashlight. Bear in mind, I had not abused the light, submerged it, dropped it, exposed it to shock or high heat, and I would go as far as to say I babied it. It spent most of its time in the holster, on my belt.

Streamlight has a limited lifetime warranty on parts defects, and so I decided to send the flashlight to the Streamlight repair facility, after filling out an online repair form on Streamlight's website, accompanied by a detailed description of the problem. I asked them to call me with their findings. I paid for 2 day priority mail, it was shipped within 2 days to their facility, and by the morning of the 3rd day, it was marked as shipped back to customer. I called them and asked what the problem was with my light, and they said it was that I must be using bad or inferior batteries, because they couldn't find anything wrong with the light. I told them that there was indeed a problem with the light, and that I had used both Energiser and Duracell batteries with expiration dates of 2021, and they said that I must be mistaken, and that they strongly recommend more new batteries. Personally, I don't think they looked at it at all.

When the flashlight shipped back to me, I decided to inspect it myself. I figured I'd lose nothing since honoring the warranty was seemingly ignored by Streamlight, and as is, I had a useless paperweight of a flashlight. I started by cutting the rubber button on the tail-cap off, exposing the "guts" of the flash-light's switch, and immediately exposing the problem: corrosion in the tail-cap. An easy fix that I believe that Streamlight should have easily found and fixed. I ordered a new tail-cap on eBay for $16, and the light works like new.

In the end: Does the light work now? Yes, but because I fixed the problem.
Did it work in the beginning? No.
Did Streamlight honor the warranty? No. They insinuated that I was mistaken to weasel out of warranty work, and offered no solution to the problem.
Total cost of flash light after repairs, shipping, and batteries: Easily over $100
Would you recommend this product? No. The product is made in China, offers quality craftsmanship, but poor quality control, and customer service is marginal at best. For you to buy a flash light this expensive, you would have to need it for a tactical/emergency situation, and if it doesn't work in even simple situations, you have a serious problem.

I will probably get steam-rolled for this negative review, but I can only report my experience. I can't speak for the entire Streamlight brand, nor other model flashlights of this brand. I'm only speaking from my experience, and this being my first and only Streamlight, I can tell you that I'm not pleased.

333 of 350 people found the following review helpful.
4Great light at a ground breaking price.
By Haef
First, I vacillated between 4 and 5 stars here. I'd give it 5 if it had every feature I wanted, but I'm also picking nits here.

I've only used this light a bit, but I wanted to report on it for those considering one. It's been backordered for months, but did actually ship when the seller said it would.

The PT HL is a crazy bright light, at a price that beats similarly priced lights with lesser output. I have a Surefire GX2 Pro, which is a very good comparison, given they are at a similar price point (indeed the GX2's are priced $15 higher than the PT HL!; bet that situation changes soon...). Both are similar in size and use two CR123A batteries, both have high/low output capabilities.

Some comparisons:

OUTPUT:
PT HL low/high 35/600 lumens, GX2 15/200

Both use LED's; why anyone would buy an old-school bulb flashlight is beyond me unless you are incredibly cheap. Then why are you looking at this light? The ONE virtue of bulbs you don't find in LED flashlights is, with a few exceptions, adjustable beam spread. But the efficiency and reliability of LED's so far outweighs bulbs I don't mind the tradeoff. Just be careful to pick the proper light for your application, which mainly means "how close is your work area?"

To Streamlight's credit, the beam spread of the PT HL is actually a bit wider than the GX2. This is especially good for close work. Creating a pencil-thin beam is a good way to make your output figures look great by concentrating the light in one spot, but such a beam isn't very practical unless you are trying to illuminate something hundreds of feet away.

I'll also be interested to see if I find the slightly brighter low setting a good or bad thing.

So is 600 lumens bright? Why, yes it is! It isn't mind-bogglingly brighter than 200 lumens (which is very bright mind you), but it is most certainly brighter.

BATTERY LIFE:
Streamlight also somewhat 'fess's up about the runtime one can expect when using the high output setting. Their literature states 1 hr 15min on high, 18h on low. But they also provide a graph of the high output as a function of runtime: by 45 minutes, you'll be to half power, by 1.25hrs you'll be to 60 lumens. Let's call it about an hour on high. The GX2 is rated 2hrs high (2hrs until light drops below 50 lumens), 45 hrs on low, so both manufacturer''s are at least writing their specs in a similar manner.

Since I mostly use the low setting, I'm fine with the 18hrs. If you need to constantly use the high setting, you would probably be better off finding a light with greater battery capacity or rechargeability. But then you are talking about a physically larger light.

WATER RESISTANCE:
PT HL "IPX 7" waterproof, which translates to immersion in water up to 1 meter deep, GX2 is "water resistant".

CONSTRUCTION:
PT HL machined aluminum in black, GX2 Nitrolon plastic in black and a few other colors. The aluminum light is very slightly heavier, but as tough as the Nitrolon seems, I think they would both survive similar abuse. One virtue of the Nitrolon is it's non-conductivity, so if you are choosing a light for electrical work, plastic might be a deciding factor. Dropping a flashlight onto bus bars should not be an exciting experience.

SWITCH:
Both are operated via momentary/sustained pushbutton on tail. GX2 has low/high settings, PT HL has three different configurations you can program the button to: high-strobe-low, hi only, low-high. Not sure why they don't give a couple more options, such as low-high-strobe. I don't see myself using the strobe feature much except perhaps for long distance signaling. Normally I want the low-high behavior (like the GX2), but it would be nice to be able to get to the strobe if desired. Putting the strobe in the middle of the high-strobe-low program seems odd, but I'm not using it for tactical purposes. Perhaps it makes SWAT guys happy, but I don't want to have to step through the strobe to get to the low & high settings that I'll be using 98% of the time, and I rarely see myself wanting to start the light on high.

OTHER:
The PT HL comes with a nylon holster, the GX2 does not. Both provide an option for a lanyard, but both suffer the problem of the lanyard attachment point being part of either the pocket clip (standard with the PT HL), or a ring sandwiched between the body and tailcap of the GX2. If you find the pocket clip (like a ball point clip) on the PT HL annoying, you can remove it. Both types of clip don't look like they would survive if you really yanked the lanyard. But if something is pulling the light that hard, maybe you don't want the lanyard around your neck to be connected to the light anymore...

The PT HL pocket clip is also deathly tight: if you want to use the clip, you'll probably want to adjust it with pliers to your liking.

I also don't see much in the way of other accessories for this light (yet). I'd like a red filter, which is available for the GX2.

In summary, this is a great super-bright light, by one of the oldest names in flashlights. I think they've got a winner here for sure. Probably the things you'll want to consider in making your choice are: case color, run time, intensity, plastic or metal case, need for seizure-inducting strobe feature.

--------------

A little update:

-After studying the lanyard clip on the PT HL, it would take an immense amount of force to tear it off the light. The only downside is if you want to use a lanyard attachment point but find the "pen clip" feature needless and in the way, too bad, you get them as a team.

-Unlike the GX2, you have to double-click the button to move between modes. Sometimes. I can't figure out Steamlight's logic behind this. I.e.: You click once to turn on the light, double-click to move from low to high, single-click to move back to low. Part of this makes sense, since a hard press of the button is electrically turning the light on and off, but a gentle touch is making a momentary interruption the software can pick up on to change states. But even then, some soft touches are single presses and some are double.

The switch is well designed and requires a deliberate touch, so I don't think this programming prevents any accidental changes. The double-click takes a tiny bit of getting used to, as the GX2 just requires you to click the button once to switch modes. One the other hand, the GX2 has the twist-to-turn-on feature, which is annoying in its own special way. More problematic is when the ProTAC is set to hi-strobe-low, I find it hard to get from strobe to low. It's oddly touchy about how you double-click it. I don't much care in this particular situation because as I mentioned I don't see myself using that button setup.

-My reaction to the brighter low setting of the PT HL vs. the GX2's low setting: It's brighter, duh. There might be a very good reason Streamlight chose this brightness level for the low setting, perhaps in response to some particular user group feedback. I'm afraid for my miscellaneous uses it is a tad unnecessarily bright; what I really would like to see is another couple of program settings for the button, either extralow-high, or extralow-low-high, or extralow-low-high-strobe! Hey, it's got a processor in it, why not make it do everything? You just don't need this this much light on low to look at a map or read a driver's license. All it does is manage to temporally trash your night vision.

-After extensive night-time walking around the woods and fields near the house, it becomes apparent just how much brighter the PT HL is than the GX2. GX2 is no slouch, but this is really wicked bright, and I like the distribution of the beam better than the GX2. The only thing that makes it that much more amazing is that it's coming from a little light you had in your pocket a moment ago!

-One minor but possibly important oddity: Apparently the PT HL is using a pulse width modulation (PWM) scheme to provide the low light setting. What this means is that the processor is pulsing the LED on and off very quickly, so quickly that the light appears constantly on but dim. The downside to this is when in the low setting, the frequency of the PWM is fairly slow. If you are out in the rain or snow, you'll notice a stroboscopic stop-motion effect with the rain drops or snow flakes. This may just be annoying but perhaps more seriously, if you are considering using this to service equipment with spinning parts, it may create a hazardous situation if you are looking at gears or blowers, and the stroboscopic effect causes the spinning equipment to appear to be running at different speeds than it really is, even backwards, or barely moving at all! You won't have this problem on the high setting, but you've been warned. The GX2 does not seem to exhibit this behavior.

More testing on this issue: As mentioned, the low setting of the PT HL strobes above the persistence of vision, which is why it doesn't look like it is strobing. But the pulse rate is a very low 130Hz, or pulses per second. This is slow. I tried shining it on a variety of moving devices around the house to see what the effect would be. Blowers, power tools, car parts, appliances and the like. While you might be viewing these objects with some ambient light diffusing the effect, if you are relying solely on the light of the PT HL you may have issues. At 130Hz, I can make spinning drills appear to stop or even run backwards. Same with low speed cutting devices like a reciprocating saw. Peering under the hood of the car, radiator fans appeared to turn slowly, belts and pulleys slowed, stopped, or ran backwards dependent upon engine speed. In short, this phenomenon can range from totally inconsequential in some applications, annoying in others (think snow or rain as I mentioned), to downright dangerous if it causes you to misinterpret the operating state of some piece of machinery you are looking at. Imagine a noisy mechanical room where you can't tell by hearing if a particular piece of equipment is running, and you are evaluating a spinning gear solely on its motion. Go ahead and touch it...

This issue may be tolerable if you are aware of its existence; if you are purchasing a bunch of these lights for your HVAC mechanics, you might want to seriously consider a different product.

For LEO's, aside from the rain & snow situations I've mentioned, I should also note that if out searching in the tall weeds, moving one's eyes and the flashlight around can also create very subtle strobing effects. The weeds sort of flicker, especially in one's peripheral vision, which is more sensitive to contrast changes then central foveal vision. Some people are more sensitive to this than others, so this tweaky issue may not be a bother to many folk. For the sensitive folks, hunting around in the weeds for a couple of hours looking for evidence may be unnecessarily exhausting & headache inducing.

171 of 207 people found the following review helpful.
3Streamlight 600 lumens vs. Coast HP17 600 lumens
By Ed Z
So my Streamlight arrived today and I have been waiting for it to get dark since around noon time. Finally, I took it outside and started to torment my neighbors, excellent compact light. Notice I said compact and not pocket, yes there is a pocket clip but typical of Streamlight, the clip is placed so the head of the light would be down in your pocket. The head of this light is huge, too big to fit comfortably and not to mention it gets stuck in my jeans if I am brave enough to sit down on it. Guys, turn the clip around exposing the head in my pocket and it will speed the deployment as well.

This light is bright, not a pinpoint of light, but a nice medium flood of very bright light. The beam, directed across the street, lights up the entire side of the house (3 bedrooms and a garage) with clean and white usable light. In the distance I can light up trees on the other side of the lake. I can't see a pine cone but I can see the canopy.

So I dragged out my COAST HP17, only because it is also 600 lumens. Now you can fight about the significant size difference. For those who are not familiar, the HP17 is the size and weight of a 3 "D" cell Maglite. So it is not a compact light but it is the same rated lumens, price, and my only other comparable light.

Well the light output of both lights performed the same; I could light up the house across the street, the canopy of the tree across the lake and generally irritate all those around me. But the Coast light has adjustable and locking "spot to flood" and it eats only "D" cells. So overall you get more usable light but in a much bigger package.

Who is the winner? It depends on your size needs and your feeding budget. For my duty belt, I want the Streamlight, for my glove box I want the Coast. Keep in mind the Streamlight will give you less than 90 minutes on High power. The Coast light is still on its original batteries that it arrived with 8 months ago. Feeding the Streamlight is $8-10, while the Coast is filled up for less than $5. Stranded on an island I'll take the Coast because of the battery life and I can use it as a club.

Actually they are both winners, As much as I whine, I have never returned a flashlight and I'm not starting today!
Thanks for reading and I hope I made someone smile today!

See all 665 customer reviews...More...


Rabu, 02 Desember 2015

Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement)

Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement)..


Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement)

Grab Now Photive Original LP-E8 Ultra High Capacity Li-ion Battery For Canon T5i, T4i ,T3i and T2i (Canon LP-E8 Replacement) By Photive

Most helpful customer reviews

147 of 149 people found the following review helpful.
5Great Batteries!
By bkbz
I have used these batteries for a couple of weeks now. I can tell no difference from the original Canon batteries other than these last longer. I use 2 batteries at a time (grip), and have snapped ~1,000 shots without the battery bar going down once.

These batteries are packaged well and shipped very fast.

It took about 2 hours to get to a full charge out of the box. If you are looking for T2i batteries, look no further!

**UPDATE**

I have had these batteries for a few months and still feel the same way as mentioned above. I have been using the batteries without the grip (1 battery at a time) and seems to get about 20-30% more shots than the stock Canon battery. Recharge time is about 2-3 hours from dead. Spend your savings on lenses, not "Canon" branded batteries.

75 of 76 people found the following review helpful.
3Great battery life, but keep a watch handy
By kronabus199a
I just bought this battery, and decided to do a side-by-side comparison between a 3 week old Canon battery, and this brand new battery.

First off, both batteries were tested on a Canon T3i, at 1920x1080 24fps, with a Sandisk Ultra 16GB class 10 and a Transcend 16GB class 10 as the SD cards of choice. Also, both batteries were tested with continuous recording, 'til each battery died.

The Canon battery lasted approximately 90 minutes, while the Photive battery lasted approximately 86 minutes. So, it holds up within just a few minutes against a brand name battery, which is amazing for the price.

However, there is a catch. The battery meter does NOT show the battery life. It will go from full to dead with absolutely no indication. Not even the halfway mark. As it states in the title, keep a watch/timer handy to keep track of your battery life.

Other than the guessing game you may play with its life, it's well worth the price tag given how long it lasts. And the fact that you can shoot 2 full 16GB cards worth of video without changing batteries is big plus.

I would recommend going with the STK battery, as it lasts about a minute longer, and costs $2 less. And neither of these batteries report to the battery meter.

63 of 66 people found the following review helpful.
5Photive LP-E8 battery
By TA Greene
Great buy. I purchased this product as a second battery for a Canon T2i camera. This battery does a good job. It operated my camera for over 700 photos. 100+ photos were with flash and auto focus operation. Recharging this product in the Canon charger was the same as the original Canon battery.

See all 654 customer reviews...More...


Minggu, 29 November 2015

Panasonic KXTG7873S DECT 6.0 3-Handset High Quality Phone System with Answering Capability

Panasonic KXTG7873S DECT 6.0 3-Handset High Quality Phone System with Answering Capability..


Panasonic KXTG7873S DECT 6.0 3-Handset High Quality Phone System with Answering Capability

Buy Panasonic KXTG7873S DECT 6.0 3-Handset High Quality Phone System with Answering Capability By Panasonic

Most helpful customer reviews

237 of 241 people found the following review helpful.
5Two Great Features
By Anthony R. Pagano
Notwithstanding the complaints of others this phone works great out of the box. The handsets are easy to hold, easy to read, and the volume is more than adequate for those whose hearing isn't as good as it used to be (like me). And while this phone system does have a large number of features the paper manual has a well laid out matrix for locating the features you need to set up or access. Now for the two great features I've never had:

1. When you let the answering machine pickup an incoming phone call you don't have to jog to the base station to monitor the message being left by the calling party. You can set up things up so that all remote handsets can monitor the message being left as well.

2. And the most important feature in a world of unwanted, unsolicited and mostly unstoppable robo calls is the BLOCK CALLS feature of this phone system. I've found that the "Do Not Call" list mechanisms provided by the gov't are almost universally ignored by telecall centers. And complaining to the government agencies is even more useless. Before I dropped my Verizon Landline service I could only block 5 telephone numbers and when I switched to my cable provider's phone service I could only block 20. Luckily this phone system allows you to block up to 250 different phone numbers. You can also set the phone to "no ring" when a blocked number is received. My home phone has been blissfully quiet. I only have to add a few new annoying numbers each week. This feature alone is worth the price of the phone.

82 of 84 people found the following review helpful.
5The crucial missing link when going completely wireless
By Wood B. Hermit
I have had this latest incarnation (2013 model) of the Panasonic wireless phone system with three handsets and link-to-cell feature for about two weeks now and am quite pleased with its overall functionality.

After ditching my standard land line telephone and going to Vonage in 2004, I finally (June 2013) also dropped this broadband VOIP service provider since the rate plans being offered were completely unrealistic and simply did not meet my usage needs. Why spend nearly $30.00 per month for the cheapest Vonage offering which includes several hundred or even unlimited monthly minutes when my home phone line hardly got used at all? No truly low-use plans were available, so bye bye Vonage!

I have now gone completely wireless with two different cell phone lines and this Panasonic phone system has proven to be the crucial missing link in optimizing the use of my cell phones when I am at home.

Both my cell phones pair easily via Bluetooth with the base unit of the Panasonic system which can link up to two cell phone lines. If possible place the main base of the phone system in a location where you have the best cell phone reception to optimize your results. At least for me, cell phone pairing seems to work better when the cell phone(s) are near the base.

Once this is done, I can essentially completely forget that I have cell phones when I am home. Everything with regard to making and receiving telephone calls is accomplished using the Panasonic phone system.

NOTE: The link-to-cell pairing functionality (as do many other functions on this telephone system) require that non-intuitive numerical codes be entered via any handset (not via the base!) at the appropriate time (e.g., for link-to-cell Enter [MENU]#6241 or [MENU]#6242 for cell phone lines 1 or 2 respectively). Therefore, always be sure to keep the detailed Operating Instructions, which truly do cover everything you need to know, readily available. I simply keep mine near the base of the phone system. If you should lose them, have no fear. They are more than likely downloadable from the Panasonic Web Site or available elsewhere on the Internet.

Receiving a phone call on either cell line works seamlessly; just answer the phone using any handset. When making an outgoing going call you can easily select which cell phone to use on the bright paper white display on any one of the Panasonic handsets.

A land line of any sort is NOT needed to use this Panasonic phone system. You can use one if you like; the capability for doing so is there if you need it.

If like me you are going completely wireless (1 or 2 cell phones only!), then be sure to select the appropriate set up menu option for doing so (see the detailed instructions provided) and not only will you get rid of the annoying constant reminder on the handset displays to check you land line when you don't have one, but you will also activate some additional time-saving features specifically pertinent to cell phone use when pressing the various buttons on the Panasonic phones (e.g., you can directly hit the green phone button to answer instead of first having to select cell phone mode when you also happen to have a land line).

What I especially notice and like when using my cell phones at home in combination with this Pansonic phone system is the greatly improved audio quality available through the Panasonic handsets. There is a day and night difference in clarity when using either of my cell phones directly versus first processing the pertinent audio signals via Panasonic's DECT 6.0 technology. A noise reduction feature is also available when needed.

It's also pretty nifty to have what essentially amounts to spoken caller ID included with the Panasonic phone system as it not only displays the incoming number on its big, bright and clear display, but also reads out the numbers individually in an easy to understand female voice. If the incoming call/number is for an entry already found in the phone book (can hold 3,000 entries) of the phone system, the voice will also identify the caller by name, if appropriate.

Speed dial capabilities are also available on this phone system, as is the capability of setting a time of day when you would like the Panasonic KXTG7873S not to ring/answer incoming calls such as when you are sleeping. This is definitely a feature that I am using; who needs a wrong number at 3:00 am! Ditto for the call block feature that lets you eliminate up to 250 annoying, repetitive callers permanently from your life! It also includes the ability to block all callers who do not display a phone number such as "Out of area" calls, etc.

You can obtain very effective additional assistance in blocking telemarketing and similar unwanted phone calls by subscribing to the free Internet service called NOMOROBO which is not yet available for all telephone service providers. Check their Web Site for more detailed information and to see whether you qualify. If you are able to subscribe to the NOMOROBO service, you can use it to do the initial grunt work of screening calls. Anything unwanted that still manages to get through then can be specifically and quickly blocked by the Panasonic phone system itself.

There are many more optional features available with this phone system, most of which I am certain that I will never use. However, some of them may of interest to other potential buyers. If there is a specific indispensable feature that you are looking for, this Panasonic phone system very likely has it. Nevertheless, be sure to do appropriate research in this regard either here on Amazon or the Panasonic Web Site on the Internet before purchasing.

This purchase so far has been well worth the asking price and I can recommend this cutting edge Pansonic wireless phone technology without reservations.

UPDATE IN FEBRUARY 2014

I have in the meantime once again acquired a land line - specifically a Vonage VOIP line on 50 Mbps WiFi - in light of the fact that Vonage offered me a very attractive monthly rate of only $9.99 (forever with no contract!) as a former customer of many years duration.

This works out to about $13.00 to $14.00 monthly after taxes, etc. which is a big improvement over the $30.00 monthly plus taxes and fees that motivated me to leave Vonage in the first place.

The aforementioned Pansonic phone system has continued to function flawlessly both with my 2 cell phone lines and the new VOIP line - no problems whatsoever using 3 lines.

78 of 89 people found the following review helpful.
4Great idea, mediocre realization, gets better with use
By J. G. Hancock
Edited May 30, 2013. Pushing up to 4 stars, simply because it's a great product once you get the hang of it, but there are still issues you may encounter that aren't intuitively obvious without having the manual at hand and/or playing with it for a few days. Also, the audible caller ID feature is proving to be both annoying and fun, and it may help in your decision.

OLD: I'd give 3 or higher stars if I'd never used a Panasonic phone product. I'd give it 2 stars if this product was something I had no experience with. It's very good overall, but it sucks in the details.
EDIT: I'd now call it 4 stars after some experience with it, but still, the instructions and all the possible programming problems you may encounter are concerns. Some reviewers and commenters have cast aspersions upon other reviewers and commenters who have pointed out issues, as if those with the issues are somehow not very bright. That being said, if you've read this because you're not that bright, you aren't the only one. Basically, what the unit tells you it will do out of the box isn't what it will necessarily do FOR YOU until you set it up.

I bought the 4 handset version to replace an older Panasonic cordless array, based on the specs and the very few reviews I could find. For the most part, I'm happy with the units after a week, but caveat emptor: some of the claims in the advertising are a bit exaggerated and some of the instructions in the manual are either unclear or unhelpful, and I haven't been able to contact Panasonic during their help center hours to figure out if my solutions are the recommended ones (and you may want to consider this: I've tried to contact the help phone line and the online help more than an hour before they officially close at 9:00 PM Eastern--I get nothing). At this point, I think I'd be very happy with this product if I'd never used a previous version of Panasonic phone products, and I'm a bit irate with them since I have used those previous products. I'd still recommend it.
EDIT: I did get through to Panasonic's help line, just to see if I could. They are slow, somewhat helpful, but seem to be reading from the manual, so if a lack of clarity in the manual is an issue for you, talking to them may not help.

On the plus side: the sound quality of each unit is great; changing phonebook settings on one unit changes all the others; pairing with an iPhone is easy but with some funny issues not covered in the manual nor on the Panasonic website. This unit also doesn't have a problem with WiFi or microwaves for sound quality. The speaker phone is fantastic. The handset has no protruding antenna, and is fairly small. The keys are also large. After a few days, the basic operation will be obvious, and you'll probably love it.
EDIT: This part is why I've rated it higher, and modified my review. The sound quality and inter-unit communication is great. Notifications on the units for an incoming call on a paired cell is fantastic, though takes some getting used to. Calling from the unit via hardwired landline OR cell is easy and works great with the paired cell nearby. And, recognition of the cell after pairing is very quick: the unit recognizes my cell when I walk into the house.

On the minus side: there are quite a few things I'm annoyed with, the first being that the manual is required for doing anything beyond just shoving the cords in; some of the features and programming require you to reference the manual for either handsets OR the base unit; and some of the simple descriptions in the printed manual as well as what I see on the Panasonic website as of 5/10/13 don't help with the problems you may encounter. This product somehow combines user-friendly setup with arcane and tortuous fine-tuning.
EDIT: nothing different here.

FIrst: don't throw the manual away. There are many programmable functions that you'll only find by reading the manual, and its index is adequate but sparse. The Panasonic website information for this product is horrible at this point (5/10/13).

Second: if you have an iPhone 5 (not sure if this is true for earlier versions): pairing via Bluetooth is easy (scarily so), and sending contacts from the IP5 to this unit MANUALLY can't be done. What I found is the following, which will probably only make sense once you get the thing:

1. On your iPhone, if you want to transfer phone numbers to the Panasonic with MOST of the information, set up those numbers in your Favorites list on the iPhone.
2. Set up the contact transfer on the Panasonic once the pairing is done; select AUTO for the phonebook transfer (since MANUAL doesn't work, or didn't for me as of this writing): allow a few items to transfer, then CANCEL it. Then, go back to your iPhone, and look under SETTINGS and BLUETOOTH. Find the pairing for the Panasonic unit. There should be a list of address books the unit will try to pair with. Deselect everything on the iPhone except the Favorites (where you've put your transfer data).
3. Then, return to the #618 "phonebook transfer" on the Panasonic, select AUTO, and the contact numbers you put in your iPhone Favorites will be pulled into the Panasonic system.
4. Then, even if you've followed the manual's instructions about setting up international, you'll find that the imported numbers probably don't include 1 in front of the 7 digit numbers you pulled in. At that point, you have to edit each imported number to make it dial correctly.
5. My experience: even if you set up the international/country/domestic settings before import of the numbers, you'll still have to go into the Panasonic handset and fine-tune and/or change what was imported.
EDIT: 6. You may not have the same issues if you have only one address book in your iPhone (I had 4, some corporate, some iCloud, some shared).

Anyway, if you only need a few or a few tens of numbers pulled in, the mediocre method used by the Panasonic unit means you'll have to edit some numbers instead of putting them in from scratch. It's not that big of a deal, but it's not what Panasonic advertised.

Third: read carefully and test the "benefits" like audible caller ID, paired Bluetooth text notification, and cell connections. These are all selling points, and can quickly become pains in the ass. You can change how the Panasonic units handle these things. I thought it would be neat to have each Panasonic unit notify me when I have a text message on my paired cell, until I actually did it. Turns out that can make you suicidal.
EDIT: the audible caller ID is even more annoying (or enjoyable) if you get calls with strings of consonants or vowels in the caller ID name line, or calls from names that the phone recognizes but can't really pronounce. I'm leaving it on, just for giggles, since the voice announcement does some creative things with abbreviations and multiple letter strings that aren't simple words (e.g. a call showing up as coming from "ATT" is announced as coming from "at"; a friend whose last name is French was announced using some sort of diphthong-speak transliteration). I've found that such announced calls are more enjoyable if I've been drinking, and if you have callers with names recognized by the system who have names that include strings of vowels or consonants that sound a certain way using the correct pronunciation, you may want to use the audible feature just to see what it will come up with. I'd love to know how the audible caller ID works in Poland, Wales, or France.

See all 427 customer reviews...More...


Sabtu, 28 November 2015

Brother IntelliFax-4100E High Speed Business-Class Laser Fax

Brother IntelliFax-4100E High Speed Business-Class Laser Fax..


Brother IntelliFax-4100E High Speed Business-Class Laser Fax

Grab Now Brother IntelliFax-4100E High Speed Business-Class Laser Fax By Brother

Most helpful customer reviews

32 of 33 people found the following review helpful.
5How to configure Brother IntelliFax-4100E for VoIP
By daycominc
Here is the procedure to configure Brother 4100e fax machines to work with faxing over VoIP.

Enter Maintenance Mode:

1. Unplug power from rear of fax machine, hold the Menu button while plugging power back in. Continue to hold the Menu button until "Maintenance" appears in the LCD window.
2. There are no helps for the Maintenance mode. Follow parameter change procedures to the letter.

Changing Baud Rate from Automatic to 9600:

1. Enter 10 (one, zero). This will bring up WSW00 on the LCD window.
2. Change the 00 to 19. If the baud rate is set to automatic, the numbers that appear will be 11100010.
3. Change the 11100010 to 01100010. This sets the baud rate to 9600.
4. Press the "Set" button just below the LCD window.
5. Press "Stop".
6. Enter 99. This will exit Maintenance mode and make the fax ready to use again.

Changing the Error Correction Mode (ECM):

1. Enter Maintenance Mode (see directions above).
2. Enter 10. This will bring up WSW00 on the LCD window.
3. Change the 00 to 22. If the ECM is turned on, the numbers that appear will be 00000000.
4. Change the 00000000 to 11000000. This turns of ECM.
5. Press the "Set" button just below the LCD window.
6. Press "Stop".
7. Enter 99. This will exit Maintenance mode and make the fax ready to use again.

30 of 31 people found the following review helpful.
5Speedy
By Maracan
We just ordered our 2nd machine for our office. It is speedy, efficient, and easy to use. It has a large capacity memory for scanning - an important component for us since we routinely fax and receive documents up to 100 pages. It took just a few minutes to set up and operate, a plus for a busy office of so-so tech savy folks.

44 of 48 people found the following review helpful.
5Reliable and Easy to Use
By M. Scott
I have bought 2 of these over 3 years, one for my office and one for my better half. My new one has already proved itself invaluable. Easy to use, relatively inexpensive replacement cartridges and good quality print quality.

Mainly I like that it is reliable and very easy to setup with very few paper jams.

See all 128 customer reviews...More...


Minggu, 08 November 2015

SUPERSHIELDZ- High Definition (HD) Clear Screen Protector For LG G2 + Lifetime Replacements Warranty [6-PACK] - Retail Packaging

SUPERSHIELDZ- High Definition (HD) Clear Screen Protector For LG G2 + Lifetime Replacements Warranty [6-PACK] - Retail Packaging..


SUPERSHIELDZ- High Definition (HD) Clear Screen Protector For LG G2 + Lifetime Replacements Warranty [6-PACK] - Retail Packaging

Special Price SUPERSHIELDZ- High Definition (HD) Clear Screen Protector For LG G2 + Lifetime Replacements Warranty [6-PACK] - Retail Packaging By Supershieldz

Most helpful customer reviews

50 of 53 people found the following review helpful.
5Good Screen Protector If You Use A Case
By J. Fugazzotto
If I have any bubbles or specks of dust under my screen protector it drives me crazy so I'll share my personal application method.

The first thing I do is put on latex gloves to avoid getting any fingerprints on the phone or screen protector. I then clean the screen on the phone thoroughly. I will usually use a bit of water or LCD screen cleaning solution for this. When I peel back the first layer of the screen protector revealing the side that will stick to the phone I do it upside down. What I mean is the side that will be stuck to the phone is never facing up at any point to avoid getting any dust or debris on it. Right before I go to put on the screen protector I will do one final blast of compressed air over the screen of the phone to remove any dust particles that may have settled on it. As quickly and carefully as possible I then apply the screen protector. Using this method I do not get any bubbles or specks of dust under the screen.

As far as these screen protectors go they are fine and they don't have any orange peel effect. They are sized perfectly so that when you put on a case the case will not disturb the edges of the protector. If you are a brave individual that usually forgoes cases then you may think these screen protectors are just a tad too small.

31 of 35 people found the following review helpful.
5Very pleased -- VZW G2
By J. Suh
It is your standard screen protector. Came with 6 included with 2 cleaning wipes.
Fits the G2 screen perfectly--the whole face is covered minus the speaker and FFC area up top.

Extremely fast shipping and high quality product!

16 of 17 people found the following review helpful.
5Great Screen Protector
By Chris
This was the easiest screen protector for me to install. Took only a couple minutes and it looks like it was done in store.

See all 397 customer reviews...More...