VideoSecu Tilt LCD LED TV Wall Mount for 32-65" LCD LED Plasma Television M80

VideoSecu Tilt LCD LED TV Wall Mount for 32-65" LCD LED Plasma Television M80..

Buy VideoSecu Tilt LCD LED TV Wall Mount for 32-65" LCD LED Plasma Television M80 By VideoSecu

Most helpful customer reviews

68 of 69 people found the following review helpful.
Solid, affordable and easy to install HDTV wall mount
By Mark
I bought this wall mounting system based on the other person's review. I'm glad that I did. UPS delivered this mount on the same day my new TV was getting delivered. With a little measuring, I had this installed in about an hour. It came with all of the hardware and fasteners that I needed. No missing pieces. No damage or scratches. It mounts to studs and it very strong. There are holes in the base plate to run wires through. They are in 2 different places so you can pick the location that fits your situation best. I was worried that this might be a 2-person job but I did everything by myself. I mounted a new 40" Samsung. It fits securely and will not fall off the wall by mistake. I have had to remove the TV 3 times due to adding components and running new wires through the wall. Loosening the security screws on the TV rails allow you to take the TV off of the wall, do your business and hang it back up again in no time. Tighten the security screws once again and you're done. You can tilt the top down if you like but I have mine flush with the wall. It looks classy and there are no visible wires. My wife thought it was magic. This is a great bargain and well made. This is the wall mounting system for you too.

29 of 30 people found the following review helpful.
works great for cheap
By ScrawnyPunk
Easy to install and works the same as brackets priced twice as much. I went out on a limb to 'buy cheap' and was rewarded for once - why pay $75 for the same piece of metal just because it's branded? This one works great.

30 of 33 people found the following review helpful.
Heavy duty, excellent buy
By DrivingWheel
Don't let the price fool you into thinking this is not a quality product. Not only is the bracket and arms of solid construction you get an amazing amount of bolts, washers, spacers that will accomodate any flat screen TV.

It comes in a shiny strong box that's shipped in another snug fitting shipping box, so there's no chance of shipping damage.

Seriously, I don't know how Warehouseseller can sell this high quality product for this price.

As the instructions say, make sure you use a stud finder to find the vertical wall studs. You want the lags to hit the center of the stud. Another trick I've learned in locating the center of a stud (if you don't have a stud finder) is to knock on the wall. As you move down the wall you'll hear the sound go from a hollow knock to a harder one. This is where a stud is located.

(Locating the upper two lag bolt hole points) Put a pencil mark at the harder knock point. Now take a drill motor, a 1/16" bit and start drilling holes left and right of your mark until you find both edges of the stud. Adjust your mark to be centered on the first stud. Vertical studs are placed 16" on center, so measure over 16" and locate the 2nd stud in the same manner using the drill motor. Make sure to drill a pilot hole into the stud, so the lag doesn't split the stud. The hole will be the size of the lag shank (thickness of the lag without the threads).

Now that you have the upper lags holes drilled the lower ones should fall into place, but if you feel inclined you can "drill search" the lower ones also.

The built in level is fairly accurate, but I used a 4' level to make sure.

See all 367 customer reviews...More...